What Are The Most Common Furnace Problems? 

What Are The Most Common Furnace Problems? 

Generally, a significant amount of the household budget is involved in the HVAC maintenance costs. It is seen that with a decrease in temperature, unfortunately, the furnace starts facing certain problems. In such extreme weather conditions, it becomes necessary to address these problems. Mostly these problems are not new but are the most common ones. Getting familiar with these common furnace problems and their causes helps the owners in many ways. 

Firstly, knowing such common problems won’t make the owners tense about their appliance. Secondly, owners familiar with these problems would firstly search for the best companies for heating repair near me. Below has been listed some basic problems that the consumer must know and address. 

Less Heat Than Its Capacity 

The furnace supplies less heat than its actual or rated capacity with time. This has many reasons, including clogging of the air filter. Reduction in the heat is basically due to the increment in the load of the furnace. 

If the furnace is not maintained and serviced properly, it develops many problems. Such problems ultimately add up as a load to the furnace. This forces it to supply lesser than its capacity. 

Excessive Noise Originating From The Furnace 

Cleaning and regular inspection of the blower motor are mandatory parts of the maintenance. Owners should regularly get their blower motor cleaned. Being ignorant of the blower motor degrades the heat quality. At the same time, due to the lack of repair and maintenance, it becomes noisier. With an increase in noise pollution, the comfort of the consumers attenuates. Cleaning it once a month is the best option here for the owners. 

Tripping Of The Reset Button Of The Heating Unit 

The problem of regular tripping down of the reset button of the heating appliance is faced by many people. There are several reasons for this excess tripping down. One such reason is overloading. 

Generally, when the heating unit gets overloaded, the reset button trips. Another reason for this problem is incorrect and faulty connections. Having unclear wiring connections leads to a short circuit. This trips the reset button too. 

Water Leakage From The Furnace

Some types of furnaces develop condensation leaks. Due to it, the water acquires the space in the furnace’s base. Generally, a high-efficiency furnace with a 90% AFUE rating has this feature. When some fault hits this cool exhaust feature, the base gets filled with water. 

In such a case, the best option is to search for furnace repair in Anaheim. Here, a technician would perform the repair in the best way. 

Short Cycling Of The Furnace 

It is one of the common problems of any HVAC system to get simultaneously turned on and off. This regular on and off is generally termed as short cycling. One of the basic concepts behind this is that the furnace cannot take the load. Mostly short cycling happens due to lack of airflow and overheating of the furnace. 

These common problems can be addressed very easily by regular servicing. The consumers should contact Air Wave Technologies through our website or call 818-340-0012 for quality furnace service in Anaheim

Share on facebook
Scroll to Top
Scroll to Top